Đặt hàng
Tiếng Việt
English
Contact us
CIBA HYDRAULIC CS is high-quality hydraulic oil produced from refined mineral oils with additives to enhance features.
Characteristics:
Excellent anti-rust and oxidation stability. Good anti-wear. Good anti-foaming.
Applications:
- The hydraulic tranmission system works in normal conditions.
- The hydraulic system with the pump impeller, gearbox, piston.
- The light load plastic press machines.
- The industrial recirculation systems.
- Vacuum pump.
Ingredient:
Refined mineral oils and the most advanced additives.
Specifications and Approvals:
ISO VG 32, 46, 68…
DIN 51524 part 1; DIN 51517 part 2; ISO-L-HL; DENISON HF 1A.
Technical Data
| Technical specifications | Test methods | 32 | 46 | 68 | 100 | 150 |
|---|---|---|---|---|---|---|
| Density at 15oC (Kg/l) | ASTM D 4052 | 0.86-0.89 | 0.86-0.89 | 0.86-0.89 | 0.86-0.89 | 0.86-0.89 |
| Kinematic viscosity at 40oC (mm2/s) | ASTM D 445 | 30-35 | 44-50 | 68-73 | 90-105 | 145-160 |
| Viscosity Index (VI) | ASTM D 2270 | Min 100 | Min 100 | Min 100 | Min 95 | Min 100 |
| Pour point (oC) | ASTM D 97 | Max -18 | Max -18 | Max -18 | Max -15 | Max -15 |
| Flash Point COC (oC) | ASTM D 92 | Min 220 | Min 220 | Min 230 | Min 250 | Min 250 |
| Water content by vol/mass (%V) | ASTM D 95 | Max 0.05 | Max 0.05 | Max 0.05 | Max 0.05 | Max 0.05 |
| Water separation at 54oC (Minutes) | ASTM D 1401 | 15 | 15 | 15 | 20 | 20 |
| Foam sequence I (ml/ml) | ASTM D 892 | 10/0 | 10/0 | 10/0 | 15/0 | 15/0 |
(The above data is collected as typical figures in general, accepted in production but do not constitute specifications).
Preservation and Safety
- To put the package in the vertical.
- Storage temperature should not exceed 60oC.
- Keep off sparks and flammable materials
- Store in a covered warehouse.
- Storage tanks must be covered carefully and away from the risk of contamination.
- Used oil must be treated properly, don’t pour directly into ditches, water sources.